[Home] [Search] [Pictures] [Price Guide] [Auction Prices] [Archives] [School] [About]


Posted by: Will TITLE: BALLOON:   How to remove handlebars
Hello, I have a Columbia five star bicycle that I need to remove the handlebars on. These are the type with the crossbar. Thanks.
by: 69.143.70.129
Posted by jimmy
I did what was discribed and it still will not come out. What should i do???????
by: 207.200.116.5
Posted by Will
Thanks, They slid right off.
by: 69.143.70.129
Posted by sam
Take the clamp bolt compleatly out.Slide the bars out as you would a regular pair till you get to the cross bar.Rotate it till the small flat part at the welds on the bars will slip into the clamp split---sam
by: 69.151.98.53
Posted by Vin
Loosen the nut on the top of stem (the part that holds the handlebars and goes into the front fork).

Back it off 1/4 to 1/2 inch.

Then tap it with a hammer.

This will release the binder bolt and the stem and handlebars will come right out.

Then back off the bolt which holds the handlebars to the stem.



by: 70.19.131.27

All bicycle content (c)2021 Menotomy Vintage Bicycles

[Home] [Search] [Pictures] [Price Guide] [Auction Prices] [Archives] [School] [About]